3120 Deming Way

Middleton, WI 53562-1461

USA

Phone: 800-261-4446 / 608-831-0025

Fax: 608-831-2202

E-mail: sales@standardimaging.com

Iridium 192 Source Holders

Number - See Specifications

VERSATILE, COMPREHENSIVE

The most complete line of source holders for calibrating high and low dose rate iridium, palladium and iodine isotopes

HDR IRIDIUM SOURCES

The high dose rate iridium source holder has a 2.2 mm opening for the catheter. A rubber O-ring secures the catheter with a uniform constricting pressure to prevent catheter movement. The calibration procedure is easy and uncomplicated, and the time required for calibration is a fraction of that required for thimble ion chamber techniques.
HDR 1000 Plus REF 70010
IVB 1000 REF 70044

HDR ¹⁹²Ir QUALITY ASSURANCE TOOL

The HDR ¹⁹²Ir Quality Assurance Tool performs crucial tests of ¹⁹²Ir sources including source positioning within 0.3 mm, timer accuracy, and consistency of source activity. Tests can be completed in as little as 15 minutes and require no films or development procedures.
Medical Physics. 22(4): 435-440, 1995
HDR 1000 Plus REF 70008

LDR IRIDIUM SOURCES

The LDR iridium source holder REF 70009 features a 3 mm diameter acrylic tube which extends from the top of the insert to the most active area of the HDR 1000 Plus Well Chamber. It makes one loop at the active area and extends back to the top of the insert. A collective calibration of the entire ribbon of seeds is obtained. Fourteen iridium seeds spaced one centimeter center to center fit into the active area.
HDR 1000 Plus REF 70009

The LDR Iridium source holder REF 70034 centers a source train in the active area of the IVB 1000 Well Chamber for measurement. Source holder collar is adjusted to accommodate the number of seeds in the source to be measured. Collar is adjustable to measure 6, 10, 14 18 or 22 seeds.
IVB 1000 REF 70034

SINGLE LDR SEED SOURCES

The single LDR seed source holder features a 1.2 mm inner diameter tube which positions an individual iodine, palladium, iridium or gold seed at the most sensitive area of the well chamber. The smooth tube allows easy removal of the seed. This source holder can be calibrated for several iodine and palladium isotopes. Only one source holder needs to be purchased for multiple calibrations.
HDR 1000 Plus REF 70016
IVB 1000 REF 70043

IRIDIUM PIN SOURCE HOLDER

The Iridium Pin Source Holder is designed to accommodate three different sized iridium wire pins, such as models IRF-1, IRF-2, IREC-2, and IREL-2 manufactured by BEBIG gmbH, Berlin, Germany. Place the source holder into the HDR 1000 Plus Well Chamber to perform proper and repeatable QA measurement.
HDR 1000 Plus REF 70095

HDR Iridium Sources

HDR ¹⁹²Ir Quality Assurance Tool

LDR Iridium Sources

Single LDR Seed Sources

Iridium Pin Source Holder

Specifications

Publications