| REF Number | 90015 |
| Height | 7 cm (2.75 in) |
| Width | 22.2 cm (8.24 in) |
| Length | 23 cm (9 in) |
| Weight | 1.4 kg (3.0 lbs) |
| Three Modes | RATE: Low Range 0.001 pA – 1000.00 pA, 1 fA resolution High Range 0.001 nA – 500.00 nA, 1 pA resolution CHARGE: Low Range 0.01 pC – 999,999 nC, 10 fC resolution High Range 0.01 nC – 999,999 nC, 10 pC resolution COMBINED: Accumulated charge and the current readings are displayed simultaneously |
| Charge Collections | TRIGGER: Automatic start, stop, and reset based on user defined thresholds (Start: 0.02 – 9.99 pA; Stop: 0.01 – 9.98 pA) TIMED: User set duration (Range: 0 – 600 sec; Increment: 15 sec; Resolution: 1 sec) MAX RUN: Unlimited duration with manual stop |
| Range Switching | User selectable - High or Low |
| Repeatability | SHORT TERM: ± 0.1% ± 1 count LONG TERM: ± 0.2% (maximum change over two years) SIGNAL SETTLING TIME (typical): Low Range: 12 sec; High Range: 3 sec |
| Linearity | ± 0.06% typical for all rate and charge settings |
| Zero Drift | < 1 fA @ STP |
| Display | Backlit LCD, 2 x 20 with 5/16" characters |
| Input | BNC two lug, triaxial connector |
| Bias Voltage | Nominal ± 450 volt bias 5 USER BIAS SETTINGS: -450, - 300, - 150, 0; 150, 300, 450 (VDC) ACCURACY: ± 0.3 volt |
| Zeroing | Automatic zero function, user activated |
| Output | Isolated RS-232; bidirectional 19,200 baud rate; 8 data bits; no parity; 1 stop bit; compatible with Argus QC4 software |
| Power | 100-240 VAC, 0.5 A max, 50/60 Hz input to external power supply, 9 VDC, 1.7 A power supply output to electrometer input, UL/TUL listed power supply; internal battery: 8 hrs per charge |
| Product Standards | CE 93/42/EEC |
Specifications subject to change without notice.
