
Machine QA
DoseView™ 3D Better Hardware. Better Software. Better Data.
Making sure your patients have great treatments begins with a finely-tuned linac, and that starts with the DoseView 3D.
DoseView™ 3D Download:
DoseView™ 3D Overview
Customized Auto-Queues and 24 x 7 Support
Customized auto-queue scan sets are implemented at no cost for each customer. This time-saving feature will save 8+ hours of work when setting up scans. Customers also have the flexibility of choosing wizard-based or manual setup options to define their own scans. Custom scans created in Auto-Acquisition mode can be saved and recalled for later testing. These sets can be implemented, edited and organized on a TPS or custom basis to streamline commissioning and QA procedures.
Standard Imaging also provides 24 x 7 phone support for DV3D in USA.
Simplify Setup
- Wireless pendant with 0.1 mm fine positioning facilitates automated alignment.
- Quickly switch detectors without resetting isocenter/origin.
- Integrated hardware, convenient software and wireless communication means fewer cables and fast setup.
- Easy, repeatable tank positioning using the Precision Positioning Platform.
Accurate Measurements, Fast
- Accelerate scan acquisition using low-noise, high-speed on-board electrometer.
- Heavy gauge extruded aluminum frame maximizes rigidity, simplifies setup, and maintains reproducibility.
- Positional accuracy and repeatability within 0.1mm per axis.
- Versatility and fast acquisition with either step or continuous data collection.
Powerful Software, Quick Analysis
- Intuitive wizard based software allows saved scan routines in auto acquisition mode.
- Comprehensive suite of data management and manipulation tools.
- Acquire profile depth and PDD data in the same sequence.
- Easily export scan data to TPS with all supported systems included.
- 24 x 7 phone support in USA
Motion Control System
-
REF NumberDoseView 3D REF 92260 DoseView 3D Lift and Reservoir Cart REF 72260
-
Measurement Speed50 mm/s
-
Positioning Accuracy± 0.1 mm per axis
-
Positioning Repeatability± 0.1 mm per axis
-
PC CommunicationWireless or wired via RS-232
-
Control MethodPC or via wireless pendant
Water Phantom (Acrylic Tank Only)
-
Outer Dimensions[ length x width x height ] 692 mm x 683 mm x 542 mm
-
Scanning Dimensions[ length x width x height ] 480 mm x 480 mm x 410 mm
-
Wall Thickness12 mm
-
OtherReplaceable Fill/Drain Port
Lift Cart and Reservoir
-
Outer Dimensions[ length x width ] 1247 mm x 762 mm
-
Vertical Range685 mm - 1185 mm (tank base to floor)
-
Water PumpElectric fill, gravity drain
-
Water Capacity60 gal (227 liters)
-
Fill Speed6-7 min
-
Drain Speed16-20 min
Precision Positioning Platform
-
X / Y Fine Adjustment±12.5 mm
-
Fine rotational adjustment±1°
-
Discreet engagement10°, 45°, and 90° intervals
DoseView 3D Electrometer
-
Channels2
-
Bias Voltage0, ±150 to 450 (VDC) in 50 volt increments
-
Range2 pC - 999,999 nC
-
Resolution10 fC
-
Connector TypeTriaxial BNC or TNC (BNC unless specified)
Exradin® A28 Ion Chamber
-
Collecting Volume0.125 cc
-
Centroid of Collecting Volume4.47 mm from tip of chamber
-
Collector Diameter1.0 mm
-
Outside Diameter of Shell8.0 mm
-
Nominal Leakage+/- 10 fA
-
Shell, Collector, Guard MaterialShonka air-equivalent plastic C552
-
WaterproofYes
-
DoseView 3D Software System Requirements
-
Operating SystemWindows® 10 Professional, 64-bit Recommended
-
ProcessorIntel® or AMD®, 350 MHz or greater
-
Memory256 MB or greater
-
Hard Drive30 MB or greater
-
Screen Resolution1024 x 768 or greater
-
CD-ROM Drive2X speed or greater
-
Connectivity9-pin serial RS-232 port or USB port with USB to RS-232 adapter
Publications
-
AAPM 2020 Hans S Jans Electrometer Constancy
Saenz Roring Cruz Et Al 421 4019 2 Pb
An Investigation Into the Effect of Varying Temperature On PTP Corrections in TG-51
Commissioning Of Five Elektas Linear Accelerators Tps By Standard Imag Ing Rfa And Delta 4 Patient
Intra and intervariability in beam data commissioning among water phantom scanning systems
Videos
Webinars


Oct 14th, 2021 / 1D and 3D Scanning Powerhouse

Jul 27th, 2021 / Streamline 1D and 3D Scans with DoseView

Jul 15th, 2021 / Intuitive Annual QA

Feb 11th, 2021 / Uncomplicate your Annual QA

May 28th, 2020 / DoseView 3D en Francais
Jun 18th, 2020 / DoseView 3D in Italiano
Have Questions About the DoseView™ 3D?
Request Pricing for Complete Annual QA Solution
Confidence with fewer gray hairs. Receive more information about Annual QA Solutions.
Learn more about Standard Imaging Annual QA